Mineraluxe pH Plus – 700g

Mineraluxe pH plus is an alkaline mineral that quickly raises the pH in hot tub water. pH level between 7.4 and 7.8 prevents corrosion and scale-formation in hot tubs and swim spas, allows sanitizers to work more efficiently and is mainly responsible for the overall water comfort.

When to use & how much:

• Test hot tub or swim spa water on fresh fill and as needed thereafter
• Apply as needed to maintain pH between 7.4 7.8
• Dosage rate is based on how much the pH is to be raised:
• – If pH is 7.3 use 6 grams per 1,000 L
• – If pH is 7.2 use 12 grams per 1,000 L
• – Lower than 7.2 use 24 grams per 1,000 L
• 1 capful = 10 grams (approx.)
• Never add more than 25 g per 1,000 L per application

How to use:

• Always adjust alkalinity first, before pH or calcium hardness
• Run pumps with air controls turned off
• Apply product by sprinkling slowly over water surface in one application
• Circulate for 1 2 hours
• Re-test to confirm proper pH or add more if pH is still below 7.4