Gecko YJ-3 Bundle – K450 keypad

The Gecko YJ-3 Hot tub control bundle which includes the control pack, heater, k450 keypad and cords. Suitable for hot tubs with up to 2 jet pumps: 1 x 2 speed pump and 1 x 1 speed plus it can run a small dedicated circulation pump that has a minimum of 23 GPM. With this system the heater is not attached to the control pack, the heater is separated, offering the flexibility to mount it in a different location. The heater has about a 20″ cord that wired into the spa pack.

Whats included:

• IN.YJ-3 Spa pack 0612-221041-431
  Can run:
  1 x 1 speed or 2 speed 240v pump up to 3HP (Max 10amps)
  1 x 1 speed pump 240v up to max 2HP (8 amps)
  1 x Dedicated circulation pump 240v (1 amp max)
• Heater: 4kw
• 6 button topside control panel: iK450-3OP (0607-005012)
• 1 x Light cord 10′ long
• 1 x White LED light bulb
• 2 x Pump cords ( 1 x 2 speed, 1 x 1 speed) about 46″ long
• 2 x Mounting Bracket & screw kit (9920-101490)
• L Style mounting bracket to mount pack above the heater (As shown in image)
• Canadian 1 year limited manufacturers warranty

This bundles requires a 50 amp GFCI if powering 2 pumps.

The heater system is sensor based and requires minimum 1-1/2″ plumbing and a minimum flow rate of 23 Gallons (88 Litres) per minute. If the plumbing is smaller or the flow rate is lower the system will not heat.