Sta-Rite Pump Impeller C105-137PDBA

The Sta-rite C105-137PDBA pool pump impeller threads onto the pump motor shaft and is fastened with one impeller screw P/N C3012 in the front which is not included with the impeller. Compatible with the Sta-Rite by Pentair pool pump models listed below.

Used on Sta-rite Max-E-Glas | Dura-Glas FULL rated pumps:

• PE5F-126L — 1-1/2 HP
• PE6F-183L — 1-1/2 HP
• PE6F-126L — 1-1/2 HP
• PE52F-183L — 1-1/2 HP
• PE52F-126 — 1-1/2 HP
• P2R5F-126L — 1-1/2 HP
• P2R5YF-126L — 1-1/2-1/4 HP
• P2R52F3-183 — 1-1/2 HP
• P2R52F3-126 — 1-1/2 HP
• P2R5F3-183 — 1-1/2 HP
• P2R5F3-126 — 1-1/2 HP

Used on Sta-Rite Max-E-Glas | Dura-Glas UP -Rated pumps:

• PEA5G-126L — 2 HP
• PEA6G-183L — 2 HP
• PEA6G-126L — 2 HP
• PEA52G-126 — 2 HP
• P2RA5G-126L — 2 HP
• P2RA6G-183L — 2 HP
• P2RA6G-126L — 2 HP
• P2RA5YG-183L — 2-1/3 HP
• P2RA5YG-126L — 2-1/3 HP
• P2RA6YG-183L — 2-1/3 HP
• P2RA6YG-126L — 2-1/3 HP

Important.

The Sta-rite impellers HP rating is typically identified by the last 4 digits in the impeller part number. For example a C105137PDBA is rated for 1.5 – 2HP pumps and a C105137PKBA is rated for 3HP, these two impellers are not interchangeable. For correct fitment and performance it’s important to select the correct impeller for your specific pump model.