Dazzle Calcium Plus – 4kg

Dazzle Calcium Plus 4kg is a mineral that is rich in calcium and has been refined to increase the hardness levels in your pool water. It comes in the form of clean, white prills, and is used to raise calcium levels when they are low. This helps to prevent premature wear and tear of pool surfaces, including plaster and vinyl, and also reduces the corrosion of equipment and metal surfaces. Maintaining the correct level of calcium hardness in your pool water is crucial for achieving the right mineral balance, which enhances comfort, chemical efficiency and reduces the cost of maintenance.

Why use Calcium Plus?

• Raises calcium hardness in swimming pool water when low
• Low calcium hardness can cause the following issues:
• Etching of plaster, grout
• Increased corrosion of surfaces leading to surface damage and staining
• Highest quality product available
• Clean, granular prill form for quick dissolving with no residues and lowest impurity level

When to use:

• When the calcium hardness of your pool water is low, use Dazzle Calcium Plus to raise it.
• The recommended calcium hardness level is based on your pools surface type:
• Plaster, marblesheen, fully-tiled: 200 275 ppm
• Vinyl, paint, fiberglass, acrylic: 175 225 ppm

Application:

• 100 grams per 10,000 litres will increase calcium hardness by 10 ppm.

• Always balance the total alkalinity and pH before adjusting calcium hardness
• Always add Dazzle Calcium Plus with the pump and filter operating
• Sprinkle or broadcast evenly across the surface of the water
• Do not pre-mix this product in a pail of water
• Do not try to predissolve before application always add directly to pool water
• Take the total dosage required and split into 3 equal applications add 3 hours apart
• This allows each addition to dissolve fully into the water
• Circulate for minimum of 2 hours after the last application