Clear Water Opening Kit

ClearWater Correct Kit is a fast-acting solution designed to restore pool water clarity and balance in just 48 hours. Whether you’re correcting problem water or preparing for spring pool opening, this convenient kit combines several essential treatments to simplify the process and deliver noticeable results.

Ideal for seasonal maintenance or mid-season water correction, the ClearWater Correct Kit takes the guesswork out of treatmenthelping you achieve clean, clear, and swim-ready water with minimal effort.

Contains:

• 3x Accelerator 500g
• 1x Chlorine-Free Shock 300g
• 1x Clarifier 125g

Directions For Use:

• Accelerator: Sprinkle the contents of pouches directly onto the surface of water in front of the water outlet
• Chlorine-Free Shock: Sprinkle the contents of pouch directly onto the surface of water in front of the water outlet
• Clarifier: Place tablets directly in the skimmer or pump basket

Instructions:

• Do a backwash and raise the water level if needed
• Check the pH level and adjust to not exceed 7.2 pH
• Set system to “Filter” position
• Add the contents of the three Accelerator pouches as per the application method above
• Add the contents of Chlorine-Free Shock according to the application method above
• Add the entire contents of Clarifier according to the application method above
• Let the filtration system run for 24 hours and do a backwash
• Let the filter run for 24 hours per day until the water is clear

Instructions When Used As An Opening Kit:

• Manually remove all leaves and debris from water
• Raise the water level to the top of the skimmer
• Vacuum with the filter in the “Drain” or “Waste” position to remove any remaining debris
• Do a backwash
• Check the pH level and adjust if needed so that it is not higher than 7.2
• Set system to “Filter” position
• Add the contents of the three Accelerator pouches according to the application method
• Add the entire contents of Clarifier according to the application method
• Let the filtration system run for 24 hours and do a backwash
• Let the filter run 24 hours per day until water is clear